SDProg is a modern and at the same time very simple to use programme in Polish, which is compatible with many interfaces and provides the most important information related to the condition of the car. Its unquestionable advantage is that, in addition to providing information on the error occurring, it shows the possible causes of the fault. The diagnostic interface is connected to the OBD2 connector in the car. It communicates with the user using the SDProg application via Bluetooth or Wi-Fi. The SDProg application is available for mobile devices such as smartphones/tablets with Android or iOS.

SDProg mobile app for Android and iOS

SDProg software for Windows

Step-by-step installation of SDProg:

Wi-Fi

  1. Purchase of license code
  2. Creating a MySDProg account (if you don't have an account, click here)
  3. Installing the SDProg app (Google Play, App Store, App Gallery)
  4. Connecting the interface to the OBD2 connector in the car
  5. Turn the key in the ignition (or press Start Engine without using the brake) to turn on the ignition
  6. Pairing a device (e.g. smartphone) with the interface via Wi-Fi (device's Wi-Fi settings tab)
  7. Accepting the message about remaining in a Wi-FI network that does not have Internet access (the message does not have to appear every time)
  8. Run the SDProg application and log in to the previously created MySDProg account
  9. Selecting the connection type in the settings tab depending on your interface (Wi-Fi)
  10. Connect using the "Connect" button on the home screen

Bluetooth

  1. Purchase of license code
  2. Creating a MySDProg account (if you don't have an account, click here)
  3. Installing the SDProg app (Google Play, App Store, App Gallery)
  4. Connecting the interface to the OBD2 connector in the car
  5. Turn the key in the ignition (or press Start Engine without using the brake) to turn on the ignition
  6. Pairing a device (e.g. smartphone) with the interface via Bluetooth (device Bluetooth settings tab)
  7. Run the SDProg application and log in to the previously created MySDProg account
  8. Selecting the connection type in the settings tab depending on the interface you have (Bluetooth, Bluetooth 4.0 (BLE))
  9. Connect using the "Connect" button on the home screen

Supported vehicle brands

SDProg app is suitable for the diagnosis of all cars equipped with OBDII emission standards, regardless of the country of manufacture. Below is a list of brands and models that are successfully supported by SDProg software in OBDII mode and service mode.